Canon Printing Using a Direct Camera/Printer Connection Guide Direct Print Software Starter Guide

Operating the Shutter Remotely40
RemoteCapture Task Window
The RemoteCapture Task window has the following features.
•The settings available in the RemoteCapture Task window vary
between camera models.
•RemoteCapture Task locks the exposure and focus settings for
the subject matter in the Viewfinder section. If the lighting or
distance to the subject changes, click to reset these
settings.
Size and Resolution Selector
Selects the size and resolution at which images are captured.
You can add
comments to images
by placing a check
mark here and
typing text in the
boxes below.
Viewfinder Display
Click the [Start/Stop
Viewfinder] button
while a connection to
the camera is open to
display the image
appearing in the
camera’s viewfinder.
Slide this to zoom
the camera in or out.
Set the basic camera settings here.
Rotation Settings
Sets the rotation
parameters for
images after they are
captured.
Shows/Hides the
viewfinder or detailed
settings area.
Release Button
Releases the
shutter.
Start/Stop Viewfinder
Button
Starts or stops the
viewfinder display.
Refresh Button
Resets the exposure,
focus and white
balance.

Canon Printing Using a Direct Camera/Printer Connection Guide Direct Print Specifications

General

Brand	Canon
Model	Printing Using a Direct Camera/Printer Connection Guide Direct Print
Category	Digital Camera
Language	English