164 Additional Information
- Check that the USB cable was not accidentally disconnected.
No disc
- Insert a disc into the DVD Burner.
- This message can appear also if condensation has formed ( 172). Wait until the DVD
burner dries completely before resuming use.
No photos
- There are no photos to add to the disc.
No scenes
- There are no scenes to add to the disc.
No scenes left to add
- There are no scenes that have not already been added to discs created previously.
No transfer orders
- No photos have been marked with transfer orders ( 135).
Operation canceled
- The USB cable was disconnected and the operation was canceled. Check the USB connection.
- The scenes selected to be written on the disc include scenes recorded in MXP mode. Add to
the playlist in
advance only those scenes recorded in other recording modes and select the
[Playlist] option to create the disc.
Reading the disc
- Reading data from the disc.
Unable to recover data
- Could not recover a corrupted file.
Direct Print Related Messages
Cannot print this photo
- You attempted to print a photo that was recorded with another camcorder, has a different
compression, or was edited on a computer.
Cannot trim this photo
- You attempted to trim a photo that was recorded with another camcorder.
Check print settings
- Current print settings cannot be used for printing with the button.
Data transfer error
- The printer is experiencing a data transfer error. Cancel printing, disconnect the USB cable
and turn off the printer. After a while, turn the printer back on and reconnect the USB cable.
When you are printing using the button, check the print settings.
- You attempted to print from a memory card that contains a large number of photos. Reduce
the number of photos.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
