70 Video
Manual Exposure Adjustment and Automatic Backlight Correction
At times, backlit subjects may appear too dark (underexposed) or sub-
jects under very strong lights may appear too bright or glaring (overex-
posed). To correct this, you can manually adjust the exposure or use
the automatic backlight correction.
POINTS TO CHECK
• Select a recording program other than [ Fireworks].
Manual Exposure Adjustment
1 Open ( ) the joystick guide.
2 Select ( ) [ Exposure] and press
.
• The current exposure is locked.
• The exposure adjustment indicator
and the neutral value “±0” appear
on the screen.
• The adjustment range and the length of the exposure adjustment
indicator will vary depending on the initial brightness of the picture.
• If you operate the zoom, the brightness of the image may change.
3 Adjust the ( ) the brightness of the image as required, then
hide ( ) the joystick guide.
• The exposure adjustment indicator will change to white and the
selected exposure will be locked.
• During exposure lock, press twice to return the camcorder to
automatic exposure.
NOTES
• This function can also be assigned to the custom key/dial ( 85).
• If the recording program is changed during exposure lock, the cam-
corder will return to automatic exposure.
( 33)
Exposure
To Next Page
Loading...
Need help?
General
Weight and Dimensions
