Canon VIXIA HF S10 User Manual

Photos  93
Photos
Refer to this chapter for details on shooting photos – taking
photos and playing them back, capturing photos from video
and printing photos.
Basic Recording
Taking Photos
1 Set the camera mode dial to or
.
2 Turn on the camcorder.
By default, photos are
recorded in the built-in memory. You
can set the memory card as the
recording media for photos ( 42).
3Press halfway.
Once the focus is automatically
adjusted, will turn green and one
or more AF frames will appear.
4Press fully.
The ACCESS indicator will flash as the photo is being recorded.
IMPORTANT
• Observe the following precautions while the ACCESS indicator is on or
flashing. Failing to do so may result in permanent data loss.
- Do not open the memory card slot cover.
- Do not disconnect the power source or turn off the camcorder.
- Do not change the camcorder’s operating mode.
(33)
PHOTO
PHOTO
COPY

Canon VIXIA HF S10 Specifications

General

Filter size	58 mm
Digital zoom	200 x
Optical zoom	10 x
Image stabilizer	Yes
Focal length range	6.4 - 64 mm
Focal length (35mm film equivalent)	43.5 - 435 mm
Sensor type	CMOS
Total megapixels	8.59 MP
Optical sensor size	1/2.6 \
Optical sensor resolution	8020000 pixels
Effective megapixels (movie)	6010000 MP
Focus	TTL
Interface	USB 2.0
Video out	1
Resolution	3264 x 2456 pixels
Display diagonal	2.7 \
Macro focusing range	0.1 m
Normal focusing range	1 m
Video formats supported	H.264
Maximum video resolution	1920 x 1080 pixels
Analog signal format system	NTSC
Flash memory	32 GB
Camcorder tape type	HDV
Compatible memory cards	SD, SDHC
Minimum illumination	0.3 lx
Shutter speed (photo)	1/500 s
Shutter speed (video)	1/2000 s
Product color	Black
Battery type	BP-807
Video recording time	12.25 h
Bundled software	Pixela ImageMixer 3SE

Weight and Dimensions

Depth	136 mm
Width	70 mm
Height	69 mm
Weight	500 g