31
E
Using the Full
Range of Features
Using the Wireless Controller
The supplied wireless controller can
operate the camera from a distance of
up to 9 feet 10 in. (3 m). Point it at the
camera’s remote sensor while you press
the buttons.
There are six functions which can only
be operated using the wireless
controller:
• Special playback (p. 21)
• TV-screen displays (p. 78)
• Data code on/off (p. 52)
• Photo search (p. 56)
• Date search (p. 56)
• Zero set memory (p. 55)
Insert two AA batteries, following the
= and - markings. Be careful not to
reverse the polarity of the batteries.
Remote sensor
Inserting batteries
Notes:
• When using the wireless controller in brightly lit places or outdoors, the
effective range will be less.
• The camera may have difficulty picking up the remote control signals at
extremely close range, or certain angles. Extend the range or change the angle.
• Do not leave the controller exposed to direct sunlight, or in hot or humid places.
• When the batteries run out, replace them both together.
Turning off the remote sensor
The remote sensor can be turned off to
prevent interference from other Canon
wireless controllers being used nearby.
1. Open either the camera or the VCR menu, and point the arrow at
SENSOR.
2. Select the OFF setting and close the menu.
• S | appears in the display.
(see p. 28)
SENSOR••••••OFF
To Next Page
Loading...
Need help?
General
