Canon ZR User Manual

Additional
Information
68
E
Troubleshooting
Cause and/or what to do about it
• The camera is not switched on
(p. 13, 19).
• The cassette is not loaded or is set for
erasure prevention (p. 11-12).
• The tape has reached the end.
• The battery pack is exhausted or not
properly attached (p. 8, 9, 61).
• The function cannot be used in that
recording program (p. 36).
• The camera was in record pause mode
for more than about five minutes
(p. 13).
• The battery pack is exhausted (p. 9).
• The POWER switch is not set to [
or P (p. 13).
• The LENS COVER switch is set to
CLOSE (p. 13).
• The cassette is not loaded or is set for
erasure prevention (p. 11-12).
• The tape has reached the end.
• The POWER switch is not set to [
or P (p. 13).
• The LENS COVER switch is set to
CLOSE (p. 13).
• You are attempting to play back or
record from a copyright protected
cassette (p. 59).
• The tape heads are badly
contaminated (p. 65).
Refer to this checklist first if you have any problems with your camcorder.
Possible explanations are given for each problem on the list — turn to the page
numbers in brackets for more information.
Make sure that the camera is properly connected if you are using it with a TV or
VCR. Consult your dealer or service outlet if problems persist.
Recording/Playback
Problem
? Nothing happens when I press the
buttons
? The camera turned itself off.
? The start/stop button doesn’t
work.
? There’s no picture in the display.
? There’s a blank blue screen in the
display.
F32
1/2000
12:00AM
JAN. 1,1998
F32
1/2000
12:00:00 AM
F32
1/2000
F32
1/2000
12:00 AM
JAN. 1,1998
12:00:00 AM
JAN. 1,1998
F32
1/2000
F32
1/2000
JAN. 1,1998

Canon ZR Specifications

General

Brand	Canon
Model	ZR
Category	Camcorder
Language	English