33
E
Mastering
the Basics
Connections for Playback on a TV Screen
You can connect the camcorder to a TV or VCR in order to play back your
recordings. You will need to attach a power source to the camcorder ( 12).
Power off all devices before starting the connections.
See your TV or VCR instruction manual for further details.
AV/PHONES•••AV
VCR SET UP
Through the menu, the camcorder’s AV/headphone terminal can be switched to
function as either the AV terminal or the headphone terminal.
Switching the AV/headphone terminal
Open the menu and select VCR SET UP. Then select AV/PHONES and set it
to AV or PHONES and close the menu.
• When the terminal is switched to PHONES, PHONES appears in the display.
Using the headphones
• Make sure you switch the AV/headphones terminal to PHONES before using
headphones. If the AV/headphones terminal is not switched to PHONES before
you use the headphones, noise will come out from the headphones.
,
( 39)
2_ZR40_E(9-37) 2/5/02 17:27 Page 33
To Next Page
Loading...
Need help?
General
