90
E
Editing
When you play back a tape whose audio has been recorded on multiple channels,
you can change the output channels of that sound.
1. Load a tape recorded with multiple-channel audio.
2. Open the menu and select VCR SET UP. Then select OUTPUT CH,
set it to the desired setting and close the menu.
• Refer to the following list.
Selecting audio output channels
Tape recorded on
multiple channels
main + sub
main only
sub only
OUTPUT CH setting
L/R
L/L
R/R
Played back sound
Tape recorded with
stereo sound
L+R channels
L channel only
R channel only
OUTPUT CH•••L/RVCR SET UP
( 39)
4_ZR40_E(76-91) 2/5/02 17:29 Page 90
To Next Page
Loading...
Need help?
General
