19
Required System Configuration
The minimum system configuration required to connect the cradle and perform data
communications is described below. This system configuration also makes it possible to
install and use Windows CE Services, which is included on the Microsoft CD-ROM
provided with the unit.
Minimum Desktop Computer Requirements
• Microsoft Windows NT Workstation 4.0 or Windows 95/98 (U.S.version)
• Desktop computer with a Pentium processor for Windows NT.
• Desktop computer with a 486/66 DX or higher processor (Pentium P90
recommended) for Windows 95/98
• 16 MB of memory for Windows 95/98 (More memory improves performance.) or
Windows NT Workstation 4.0 (32 MB recommended for Windows NT)
• Hard disk drive with 10 to 50 MB of available hard disk space (Actual requirements
vary based on selection of features and user’s current system configuration.)
• Available 9 or 25 pin communications port (adapter required for 25 pin
communication port)
• One CD-ROM drive
• VGA or higher-resolution graphics card (Super VGA 256-color recommended)
• Keyboard
• Microsoft Mouse or compatible pointing device
Options for either Windows NT Workstation 4.0 or Windows 95/98
• Audio card/speakers for sound
• Microsoft Office 97 or Microsoft Office 95
• Serial or built-in infrared adapter for synchronization (Windows 95/98 only)
• Modem for remote synchronization
• Ethernet LAN connection for remote synchronization
Requirements for Mobile Channels Support
• Microsoft Internet Explorer 4.0 (included on CD), which requires 40 MB to 70 MB
of hard disk space and a minimum 486/66 processor. Service Pack 3 (or higher) is
required for Windows NT systems (included on CD).
Note
Different minimum system requirements are required when using the applications
included on the CASSIOPEIA Applications CD-ROM that comes with the E-105. See
the documentation contained on the CD-ROM for full details.
To Next Page
Loading...
Need help?
General
