63
Advanced Recording Settings
Procedure
Enter the REC Mode * MENU * Movie Quality
This setting can be used to configure movie image quality settings and to select either
normal movie recording or High Speed Movie recording. For information about movie
image quality settings, see page 49.
Procedure
Enter the REC Mode * MENU * Brightness
You can manually adjust an image’s exposure value (EV value) before shooting it.
• Exposure Compensation Range: –2.0 EV to +2.0 EV
• Unit: 1/3 EV
1. Touch a level you want to set.
• To cancel exposure compensation, change the EV value to 0.0.
2. Touch “OK”.
This applies the exposure compensation value. The exposure compensation
value you set remains in effect until you change it or turn off the camera (which
causes it to revert to “0.0”).
NOTE
• When shooting under very dark or very bright conditions, you may not be able to
obtain satisfactory results even after performing exposure compensation.
Movie Image Quality Settings (Movie Quality)
Correcting Image Brightness (Brightness)
Decreases the EV value. A lower EV
value is best for dark-color subjects and
for shooting outdoors on a clear day.
Increases the EV value. A higher EV
value is best for light-colored subjects
and backlit subjects.
To Next Page
Loading...
Need help?
General
