96
Connecting the Camera with a Smartphone
(Wireless Connection)
3. When the password is the way you want, touch “OK”.
NOTE
• Changing the wireless LAN password will terminate the connection with the
smartphone. To reconnect with the smartphone, configure wireless connection
settings (page 89). If your smartphone does not support Bluetooth low energy,
perform the operations below to change your smartphone’s Wi-Fi settings.
– iPhone:
Tap the right arrow of the field where the SSID of the camera is displayed in the
Wi-Fi settings to delete network settings. After deleting, select the camera SSID
again and input the new password.
– Android terminal:
Tap the field where the SSID of the camera is displayed in the Wi-Fi settings and
select Forget. Select the camera SSID again and input the new password.
Procedure
“ ” (Wireless) * Wireless settings * Unpairing
Unpairs the camera from a smartphone.
To use the camera with a different smartphone, first unpair it from the current
smartphone.
NOTE
• When unpairing, be sure also to perform the unpairing operation on the
smartphone as well. For details, refer to the EXILIM Connect User’s Guide (page
86).
• Unpairing the camera from a smartphone will result in all pending unsent images to
remain unsent.
Unpairing the Camera from a Smartphone (Unpairing)
To Next Page
Loading...
Need help?
General
