81
Using BEST SHOT
NOTE
• With this function, the flash setting automatically becomes ? (Flash Off).
• Shooting with this function automatically sets Anti Shake to “Standard” (page 104),
but large movement of the camera or subject make it impossible to achieve the
desired shot.
• Depending on the shooting environment, image composition, and subject, this
scene may not be able to produce the desired result.
• If the camera determines that it is unable to blur the background of an image for
some reason, it will display the message “Blurring failed. Normal background
recorded.”. Note, however, that the image will be saved, even if background
blurring is not possible.
All-In-Focus Macro shoots and analyzes a burst of multiple images and combines
them in a way that produces an image in which everything is in focus: from nearby
objects to distant objects.
1. Align the mode dial with [b] (BEST SHOT).
2. Press [SET].
3. Use [8] and [2] to select , and then press [SET].
4. Select “All-In-Focus Macro” and then press [SET].
5. Press the shutter button to shoot.
• Move the camera as close to the subject as possible, and take care to avoid
camera movement and subject movement as you shoot.
• After you press the shutter button, the message “Busy... Please wait...” will
appear on the monitor screen to let you know that shooting is in progress. Do
not move the camera while this message is displayed. The recording process
takes some time to complete after the message appears. Image shooting is
disabled while the message is displayed.
Shooting with Full Focus Macro (All-In-Focus Macro)
“Program Auto” image All-In-Focus Macro
To Next Page
Loading...
Need help?
General
