Press , select the Calculate app icon, and then press .
Actual Operation 2
1. Press .
2. Use the cursor keys ( , , , ) to select the Calculate app icon,
and then press .
Key and Key
The
key and key perform the same operation. In this manual, is
used for selecting or applying a setting, while is used for executing a
calculation. Note, however, that it makes no difference whether you press
or for operations where either or is shown.
Examples
If you are not instructed to use a specific calculator app or to configure
particular settings for an example operation, the app and settings below
are assumed.
Calculator app: Calculate
Settings: Initial default calculator settings
For information about returning the calculator to its initial default settings,
see "Initializing the Calculator" (page 6).
Initializing the Calculator
Important!
• The procedure below initializes all calculator settings, except for Contrast and Auto
Power Off. Also clears all data stored in calculator memory.
1. Press
to display the HOME screen.
2. Use the cursor keys ( , , , ) to select a calculator app icon,
and then press .
3. Press , and then select [Reset] > [Initialize All] > [Yes].
•
This displays the HOME screen.
Calculator "Get Started" Screen
While the HOME screen is displayed, pressing the
key will display the
"Get Started" screen, which includes the information below.
6
To Next Page
Loading...
Need help?
General
