– 5 –
IT-G500
Item Specifi cations
CMOS Imager
(model dependent)
Type CMOS Imager, resolution 832 x 640 px, monochrom
Aimer Laser beam 650 +10/-5 nm, 1 mW or less
Resolution 1D codes: 0,127 mm, 2D stacked-codes: 0,169 mm,
2D matrix-codes: 0,191 mm
Readable Distance From a distance of a few millimetres to several metres,
depending on the size and print quality of the code
Reading
Symbologies
1D codes: EAN8, EAN13, UPC-A/E, Codabar (NW-7),
CODE32, CODE39, CODE93,
CODE128/GS1-128 (UCC/EAN128), ITF, MSI, ISBT,
GS1 DataBar Omnidirectional, GS1 DataBar Truncated,
GS1 DataBar Limited, GS1 DataBar Expanded
2D stacked-codes: PDF417, Micro PDF, Composite,
Codablock F, GS1 DataBar Stacked,
GS1 DataBar Stacked Omnidirectional,
GS1 DataBar Expanded Stacked
2D matrix-codes: Aztec, DataMatrix, Maxicode, QR Code,
Micro QR
<Power Supply/Data Communication Terminals>
123456
Pin No. Name Function Input/Output
1 V CRADLE Power supply/charge to IT-G500 –
2 D– USB D– IN/OUT
3 D+ USB D+ IN/OUT
4 V BUS USB power control signal IN/OUT
5 USB_ID USB host/client switching IN
6 GND GND –