E-10
Selecting and Playing a Tone
Your digital piano has the following types of tones
built in.
1.
Press the POWER button to turn on the
digital piano.
Left Side
IMPORTANT!
• When you turn on the digital piano, it performs a startup
routine, during which the following messages appears on
the display.
• It takes about six seconds to reach process (4) after you
press the POWER button.
• The amount of time required to perform process (2)
becomes longer and process (4) is skipped if you turn on
power while the digital piano’s setup memory is turned on
(page E-37).
2.
Use the VOLUME controller to adjust the
volume level.
VARIOUS/GM TONES
CHORUS
TONEFUNCTION
VOLUME
SPLITEFFECT
TONE/REGISTRATION
START/STOP MUSIC LIBRARY REVERBMETRO VOL
/NO
/YESMETRONOME
Tone
Numbers
Tone Type
Number of
Tones
— Refined Tone 11
001 to 061 Various 61
062 to 189 GM (General MIDI) 128
190 to 191 Drum Sets 2 sets
To select a refined tone
POWER button
(2)
(3)
(4)
(5)
(1)
: Please wait!
: System startup (Indicated by the “rotary” display
pattern shown here.)
: Complete! (Keyboard and pedal setup
complete.)
: Keyboard and pedal operations are enabled,
but button operations are still not enabled yet.
: System setup complete
• All functions are enabled.
PX320_e.book 10 ページ ２００７年８月１日 水曜日 午前９時２８分
To Next Page
Loading...
Need help?
General
