Saving Digital Piano Setups (Registration Memory)
E-27
1.
Press the TONE/REGISTRATION button so
the registration lamp is lit.
• This will cause the currently selected bank number to
appear on the display.
• Each press of the button toggles between the upper
lamp and lower lamp.
2.
Use the T/NO and S/YES buttons to display
the number of the bank that contains the area
you want to recall.
3.
Press the area button (1 through 12) for the
area whose registration data you want to
recall.
• The lamp of the applicable area button will light after
recall is complete.
Example: After data has been recalled from area 3-1
NOTE
• Registration data cannot be recalled when any one of the
following conditions exists. Eliminate the problem
condition and perform the procedure from step 1.
• The digital piano is in the Duet Mode.
• RECORDER button PLAY lamp is flashing.
• To check the current selected song or rhythm number
while a bank number is on the display, press the
RHYTHM, MUSIC LIBRARY button or CARD button.
To recall a setup from
registration memory
PX320_e.book 27 ページ ２００７年８月１日 水曜日 午前９時２８分
To Next Page
Loading...
Need help?
General
