General Guide
E-5
Use the T/NO and S/YES buttons to change the
currently displayed setting as you view the results of
your changes on the display.
• The rhythm number (page E-17) appears first
whenever you turn on the digital piano. See the
applicable pages in this manual for detailed
information about each type of setting.
• Each press of the T/NO and S/YES button will
increase or decrease the displayed value by 1.
NOTE
• Holding down either button will scroll continually
through the available settings.
• To return the displayed setting to its initial default value,
press the T/NO and S/YES buttons at the same time.
The initial default tempo is the recommended tempo
setting for the currently selected rhythm or built-in song.
Your digital piano lets you save its current settings,
and lock its buttons to protect against operation errors.
For details, see “Secondary Parameter Reference” on
page E-34.
Perform the following procedure when you want to
return the digital piano’s stored data and settings to
their initial factory defaults.
1.
While the digital piano is turned off, hold
down the RHYTHM, and FUNCTION buttons
as you press the POWER button to turn on
power.
• This will initialize the digital piano and then perform
system setup.
NOTE
• It will take some time for the digital piano initialization
procedure complete. During that time, the display
contents will be different from those that normally
appear when you turn on power (page E-10).
Using the T/NO and S/YES
Buttons
Saving Settings and Using
Operation Lock
Example: Rhythm number 01
Returning the Digital Piano to
Its Factory Default Settings
PX320_e.book 5 ページ ２００７年８月１日 水曜日 午前９時２８分
To Next Page
Loading...
Need help?
General
