E-11
Basic function
To use the cash register’s basic function
Installing paper roll
Caution (in handling the thermal paper)
• Never touch the printer head and the platen.
• Unpack the thermal paper just before your use.
• Avoid heat and direct sunlight.
• Avoid dusty and humid places for storage.
• Do not scratch the paper.
• Do not keep the printed paper under the following circumstances:
• High humidity and temperature/direct sunlight/contact with glue, thinner or a rubber eraser.
To install receipt paper
1 Remove the printer cover.
2 Open the platen arm of the receipt printer (on the left) by lifting it up.
3 Ensuring the paper is being fed from the bottom of the roll, lower the roll
into the space behind the printer.
4 Put the leading end of the paper over the printer.
5 Close the platen arm slowly until it locks securely.
6 Replace the printer cover, passing the leading end of the paper through
the cutter slot. Tear off the excess paper.
To Next Page
Loading...
Need help?
General
