E-14
To use the cash register’s basic function
To set Australian GST
The following operation programs the cash register Australian GST (the Goods
and Service Tax) setting. It is not necessary to program this setting for other
countries than Australia.
Step Operation
1 Turn the Mode switch to X position.
2 Enter the setting code “01012001” and press o key.
(Pressing o key again cancels the setting.)
01012001o
3 Press F key. Now your cash register complies with
Australian GST. The printer prints “GST system was
changed”.
F
By setting Australian GST system;
• Australian special rounding system is programmed.
• Tax symbol (*) will be printed on receipts or journals.
• Taxable amount will not be printed.
• “GST INCLUDED” will be printed on receipts or journals for tax 1.
• “TAXABLE AMT” will be printed on receipts or journals for taxable 1 amount.
• “$” will be printed as the monetary symbol.
• “MOF” will be printed on receipts.
• Ten percent tax rate, add-in tax, and rounding off are programmed in tax table 1. No setting in other tax
tables.
• Other taxable amount and tax amount than TX1 (tax 1) and TA1 (taxable 1) will not be printed on sales
reports.
• The lowest signicant digit is restricted to 0 or 5 for cash sales, received on account, paid out, and
money declaration amounts.
• Total line is printed even in direct (cash) sale.
To Next Page
Loading...
Need help?
General
