Casio SE-S10 Service Manual

— 16 —
RACWRITE/READTEST[ 10 ]
[Notes]
Proper operation is not guaranteed for the internal data and main device of RAC used in this test.
Be sure to perform RAC CLEAR TEST before this test.
[Function]
Tests if RAC is connected correctly.
YoumaycheckforallareasbyperformingRACCLEAR&WRITE/READTEST.
[Operation]
Command:
n 0 1 4 SUBTOTAL
n: Number of times to run
0 Once
1 ~ 9 Inniteloop
● If a command to specify the number of times to run the test is omitted, the test is performed only once.
● Toforciblyterminatetheinniteloop,press[C(Clear)]orturntheModeSwitchto[OFF].
[PRINT]
RAM 14
RAM WR OK
END 14

Casio SE-S10 Specifications

General

Types of payment	Cash
Number of clerks/departments	20
Number of Price Look-Up codes (PLUs)	500 PLUs
Supported paper width	57.5 mm
Backlight	Yes
Display digits	8 digits
Display number of lines	1 lines
Dimensions (WxDxH)	330 x 360 x 203 mm
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
AC input voltage	120/230 V
Power consumption	100 mA

Weight and Dimensions

Weight	4100 g