— 11 —
Message Cause
STOPPED ! • ESC key pressed on transmitting or receiving unit.
• Memory area of receiving unit full.
• Battery power drops below a certain level.
TRANSMIT ERROR ! Cable connection broken or abnormal noise in cable.
MEMORY FULL ! Memory area of receiving unit full.
7. TO CHECK THE MEMORY CAPACITY
There are two types of Memory Capacity Display, as shown below:
SF UNIT: Total memory used for storage of Telephone Directory, Business Card Library,
Memo, Calendar, and Schedule Keeper data.
SPREADSHEET: Total memory used for storage of Spreadseet data.
Press the key and then press the key to check the current memory capacity.
Following the memory reset operation, the display will appear as follows.
When the percentage of memory used reaches 100%, you will not be able to enter any more data into
memory.
SHIFT
CAPA
CAPACITY
SF UNIT
SPREADSHEET
60%
20565
16%
54520
FREE
FREE
Bytes
Bytes
0 10050
0 10050
CAPACITY
SF UNIT
SPREADSHEET
0%
51910
0%
64848
FREE
FREE
Bytes
Bytes
0 10050
0 10050
To Next Page
Loading...
Need help?
General