— 8 —
Following the RESET operation, the Home Time Display appears. The initial settings of the SF Unit after
reset are shown below.
HOME TIME: Washington D.C.
JAN/1/1994 (SAT)
12:00 AM
12-hour format
WORLD TIME: New York
Daily Alarm: 12:00 PM
Sound: Schedule alarm ON
Daily alarm OFF
Key ON
Character input:CAPS
6. TO SAVE THE DATA TO OTHER MACHINE
SF-8500 can transfer customers data to other SF-8500 with memory protection only when replacing the
LCD or the outer case. How to transfer the data.
* Before connecting the cable (SB-60 or SB-62), be sure to reset the slave machine to clear all
data.
1) Turn off the power switch and connect the two units using the cable (SB-60 or SB-62) as shown in
the drawing.
ON
CLEAR/AC
CAL
2) Turn on the power switch of each machine.
3) The slave machine must be set the date of Feb. 3rd, 1901 into the memory under the calculator
mode.
Operation: 1 9 0 1 2 3
If you don't set the date, the "PASSWORD" isn't transferred to the slave machine.
DATE DATE
TIME TIME M+
R
DATE
TIME
To Next Page
Loading...
Need help?
General