Casio V-R7000 Service Manual

V-R7000/V-R7100
– 18 –
HDMI
NOTE: Since the connector is located on the rear side, carefully connect or disconnect the cable.
1
Connect a monitor with the HDMI input
connector to the HDMI Port with the HDMI cable.
HDMI Port
2
Tap “HDMI”.
Check that a video is displayed on the monitor
together with a sound.
After checking, tap “
” to show the
judgment screen, and then tap the obtained test
result.
SD 1 (Back)
NOTE: Since the slot is located on the rear side, carefully insert or remove the SD card.
1
Insert the SD card to the SD Slot 1.
Tap “SD 1 (Back)”.
Automatic judgment is done and the test result
appears.
SD Slot 1
2
If the test result is “NG”, check if the SD card is mounted.
If not mounted, mount it and try again.

Casio V-R7000 Specifications

General

Brand	Casio
Model	V-R7000
Category	Touch terminals
Language	English