EasyManuals Logo
Home>Casio>Projector>XJ-V2

Casio XJ-V2 User Manual

Casio XJ-V2
43 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
10
Operating the Projector
This section explains how to use the remote controller to perform projector operations.
To select the input source
1.
Press the [INPUT] key.
2.
On the “Input” dialog box that appears, use the [INPUT], [] and [] keys to
select the input source you want and then press the [ENTER] key.
If you do not press the [ENTER] key, the projector will automatically apply the currently
selected input source after about two seconds.
The name of the input source you selected will appear in the upper right corner of the
projection screen for a few seconds.
The message “No signal input” will appear if no input signal can be detected.
Resolution
This projector’s video resolution is fixed at XGA (1024 × 768 pixels). Images may appear coarse, text
and other figures may be difficult to read or a moire pattern may appear when the input signal from a
computer does not match the projector’s video resolution. If this happens, change the computer’s
output resolution setting so it matches the projector’s video resolution. See the user documentation
that comes with your computer for details about changing its settings.
Selecting the Input Source (INPUT)

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Casio XJ-V2 and is the answer not in the manual?

Casio XJ-V2 Specifications

General IconGeneral
Number of colors1.073 billion colors
Native aspect ratio4:3
Projection distance- m
Projection technologyDLP
Contrast ratio (typical)20000:1
Screen size compatibility30 - 300 \
Projector native resolutionXGA (1024x768)
Service life of light source20000 h
Power sourceAC
AC input frequency- Hz
Power consumption (standby)- W
FocusManual
Offset72 %
Optical zoom1.1 x
Focal length range- mm
DVI portNo
Serial interface typeRS-232C
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Component video (YPbPr/YCbCr) in0
Noise level37 dB
Preset modesPresentation
PlacementCeiling
Product typeStandard throw projector
Product colorWhite
Analog signal format system-
Supported graphics resolutions1024 x 768 (XGA), 1600 x 1200 (UXGA)
Operating temperature (T-T)5 - 35 °C
Weight and Dimensions IconWeight and Dimensions
Width270 mm
Height89 mm
Weight2900 g

Related product manuals