Casio XJ-V2 User Manual

19
Pressing the [MENU] key displays the Setup Menu shown below on the projection screen. You can
use this menu to adjust projected image brightness, contrast, and other settings, and to change
projector settings.
The guidance shows the key operations that can be performed for the currently selected (highlighted)
menu item.
Basic Setup Menu Operations
Setup Menu Settings
 One or more letters (such as RC) after the menu item name indicates an item that is available only
when one or more particular input source is selected. The letters indicate the input source(s) where
the menu item is available.
R: RGB input, C: Component input, H: HDMI (PC) input, D: HDMI (DTV) input
 A menu item that does not have any letter after it will be available regardless of the input source.
 The initial default setting is indicated by an asterisk (*).
Using the Setup Menu (MENU)
To do this: Perform this operation:
Display the Setup Menu
Exit the Setup Menu
Press the [MENU] key. Pressing the [MENU] key to exit the Setup Menu will save the
settings you configured while it was displayed.
Select a menu item Use the [] and [] keys to move the highlighting to the menu that contains the menu
item you want to select and then press the [ENTER] key. Next, use the [] and []
keys to move the highlighting to the menu item you want to select.
Configure the setting of a
menu item
 If a menu item that has options or setting values to the right, use the [] and []
keys to change the setting.
 For a menu item that has “Modify [ENTER]” or “OK [ENTER]” to the right, press the
[ENTER] key to display a dialog box for configuring the setting.
Use this menu item: To do this:
Image Adjustment 1 3
Brightness
Adjust projected image brightness.
Image Adjustment 1 3
Contrast
Adjust projected image contrast.
Image Adjustment 1 3
Color Mode
Select one of the following projected image color modes: “Standard*
1
”, “Graphics”,
“Theater*
2
”, “Blackboard”, “Natural”.
*1 Initial default when RGB or HDMI (PC) is selected for input.
*2 Initial default when Component or HDMI (DTV) is selected for input.
Image Adjustment 1 3
Color Balance
Select one of the following color balance presets: “Warm”, “Normal*”, “Cold”.
Also can be used to separately adjust red, green, and blue.
Menu Items
(Main Menu)
Highlighting
Menu Item
(Sub-menu)
Guidance

Casio XJ-V2 Specifications

General

Number of colors	1.073 billion colors
Native aspect ratio	4:3
Projection distance	- m
Projection technology	DLP
Contrast ratio (typical)	20000:1
Screen size compatibility	30 - 300 \
Projector native resolution	XGA (1024x768)
Service life of light source	20000 h
Power source	AC
AC input frequency	- Hz
Power consumption (standby)	- W
Focus	Manual
Offset	72 %
Optical zoom	1.1 x
Focal length range	- mm
DVI port	No
Serial interface type	RS-232C
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Component video (YPbPr/YCbCr) in	0
Noise level	37 dB
Preset modes	Presentation
Placement	Ceiling
Product type	Standard throw projector
Product color	White
Analog signal format system	-
Supported graphics resolutions	1024 x 768 (XGA), 1600 x 1200 (UXGA)
Operating temperature (T-T)	5 - 35 °C

Weight and Dimensions

Width	270 mm
Height	89 mm
Weight	2900 g