Casio XJ-V2 User Manual

9
To load remote controller batteries
Important!
 Be sure to use alkaline batteries only.
To replace remote controller batteries
Open the battery cover on the back of the remote controller, replace the old batteries with new ones,
and then close the battery cover.
*
Caution
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
1. Open the battery cover on the back
of the remote controller.
2. Load two new batteries into the
case, making sure that their positive
(+) and negative (–) ends are facing
correctly.
3. Close the battery cover on the back of the remote controller.

Casio XJ-V2 Specifications

General

Number of colors	1.073 billion colors
Native aspect ratio	4:3
Projection distance	- m
Projection technology	DLP
Contrast ratio (typical)	20000:1
Screen size compatibility	30 - 300 \
Projector native resolution	XGA (1024x768)
Service life of light source	20000 h
Power source	AC
AC input frequency	- Hz
Power consumption (standby)	- W
Focus	Manual
Offset	72 %
Optical zoom	1.1 x
Focal length range	- mm
DVI port	No
Serial interface type	RS-232C
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Component video (YPbPr/YCbCr) in	0
Noise level	37 dB
Preset modes	Presentation
Placement	Ceiling
Product type	Standard throw projector
Product color	White
Analog signal format system	-
Supported graphics resolutions	1024 x 768 (XGA), 1600 x 1200 (UXGA)
Operating temperature (T-T)	5 - 35 °C

Weight and Dimensions

Width	270 mm
Height	89 mm
Weight	2900 g