25
To change the power on password setting
1.
Perform steps 1 through 5 under “To change the password” (page 24) and
display the Power On Password setting screen.
2.
After confirming that “Power On Password” is selected, use the [] and [] keys
to select either the “On” or “Off” setting.
Changing the setting from “Off” to “On” will cause the “Prompt for password when power is
turned on?” dialog box to appear. Press the [ENTER] key to confirm that you want to turn on
power on password protection, or [ESC] to exit the dialog box without changing the setting.
3.
After you are finished, press the [MENU] key to exit the setup menu.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
