15
The following Eco Mode settings are available to specify whether priority should be given to
low-power, low-noise operation or to projection brightness.
To select the Eco Mode
1.
Press the [ECO] key.
This causes “Eco Mode” window to appear on the projection screen.
2.
Use the [] and [] keys to select the setting you want.
If you select “On” here, go to step 3. If you select “Off”, jump to step 4.
3.
Perform the following steps to adjust the “Eco Level” (the balance between
low-power, quiet operation and projection brightness).
4.
To hide the window, press the [ESC] key.
While “Off” is selected for the Eco Mode setting, you also can specify whether brightness or
color should be given emphasis. For details, see “Image Adjustment 1 3 Eco Off Mode”
(page 20).
Eco Mode (ECO)
On : Enables manual adjustment to balance the needs of low-power, quiet operation and projection
brightness.
Off: Give top priority to projection brightness.
Press the [] key to move the highlighting to the Eco Level.
Use the [] and [] keys to adjust the Eco Level to the setting you want.
Fewer marks gives higher priority to projection brightness. A greater number gives high
priority to low-power, quiet operation.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
