Maintenance For Seat Belt
Inspection Of Seat Belt
The seat belt should be inspected
regularly for damage or frays. Dam-
aged parts must be replaced immedi-
ately. Seat belt assemblies must be
replaced after a collision if they have
been damaged.
WARNING!
Do not disassemble or modify the seat
belt.
Washing Seat Belt
The seat belt should be washed with
vehicle detergent or warm water and
allowed to dry naturally.
WARNING!
Never use chemical detergents, boiled
water, bleach or dye to wash the seat
belt.
Never allow water to enter the belt re-
tractor.
Airbag
The airbags work with the seat belts to
properly restrain the driver and front-
seat passenger in the event of a colli-
sion.
NOTE:
As the airbags deflate you may
see some smoke-like particles. The par-
ticles are a normal by-product of the pro-
cess that generates the nontoxic gas
used for airbag inflation.
The front occupants must be sitting as
upright as possible in order to be ef-
fectively protected.
WARNING!
Always properly position your seat belt
to maintain the proper distance from
the steering wheel. Only then can the
airbag provide optimal protection dur -
ing a collision.
Front Airbags
The seat and backrest must be posi-
tioned correctly for the airbag to pro-
vide optimal protection during a colli-
sion. The vertical sitting posture is
best when the lower back is in contact
Front Airbags
BEFORE OPERATING YOUR VEHICLE – 25
Chery Automobile Co., Ltd.
To Next Page
Loading...
Need help?
General
