Chery Automobile User Manual

Flash to Pass
While driving, you can signal another
vehicle with your headlights by lightly
pulling the multifunction lever toward
you. This will cause the headlights to
switch from low beam operation to
high beam operation and remain on
until the lever is released. Repeating
this operation can flash the high beam
headlights continuously.
Front Fog Lights (If Equipped)
With the headlight switch in the first or
second lighting position, pull the
headlight switch to the first detent po-
sition to turn the front fog lights on.
When the front fog lights are ON, the
indicator on the driver information
center illuminates to indicate the op-
eration of the fog lights. The front fog
light should only be used in foggy,
snowy, or rainy conditions.
Rear Fog Lights
With the headlight switch in the sec-
ond lighting position or when the front
fog lights are turned on, pull the head-
light switch to the second detent posi-
tion to turn the rear fog lights on.
When the rear fog lights are ON, the
indicator on the driver information
center illuminates to indicate the op-
eration of the fog lights. The rear fog
lights may distract or affect visibility of
drivers behind you. Operating this
light is recommended only under the
lowest visibility conditions.
Turn Signals
Move the multifunction lever upward
or downward and the corresponding
turn signal indicator on the instrument
panel will flash. Turn signals operate
only when the ignition switch is in the
ON position.
Front Fog Light Switch Position
Turn Signal Control
42 – FEATURES OF YOUR VEHICLE
Chery Automobile Co., Ltd.

Chery Automobile Specifications

General

Brand	Chery
Model	Automobile
Category	Automobile
Language	English