If your vehicle has
wheel nut caps, use
the wheel wrench and
ratchet
to
remove them.
Turn the wheel wrench
counterclockwise, with
DOWN facing
you,
to
remove the wheel nut caps.
Then take off the hub cap.
If the wheel also has a trim ring, use the wheel wrench
to
pry along the edge and remove it.
Removing the Flat Tire and Installing the
Spare Tire
1.
Use the ratchet and
wheel wrench
to
loosen
all the wheel nuts. Turn
the wheel wrench
counterclockwise, with
DOWN
facing you, to
loosen the wheel nuts.
Don’t remove the wheel
nuts
yet.
If the wheel has a smooth center piece or a center piece
with recessed nuts, place the wheel wrench in the slot
on the wheel and gently pry off.
2.
If the flat tire is on the rear of the vehicle, put the
jack handle extension on the jack handle.
3.
Position the jack under the vehicle.
5-26
To Next Page
Loading...
Need help?
General
