4.
Remove the screws from
the bulb retainer and
take the bulb retainer
off
of
the lamp assembly.
5.
Pull the old bulb straight
out
of
the socket.
6.
Put in
a
new bulb and push it in until
it
is tight.
7.
Replace the bulb retainer.
8.
Replace the rear lamp assembly and tighten the
screws.
You
may want
to
use a magnetic screwdriver
when installing the screws.
9.
Close the tailgate or rear doors.
Windshield Wiper Blade Replacement
For proper type and length, see “Normal Maintenance
Replacement Parts” in‘the Index.
To
replace the
windshield wiper blade assembly:
1.
Lift the wiper arm and rotate the blade
until
it
is..
facing away
from
the windshield.
2.
Push the release lever and slide the wiper assembly
toward the driver’s side
of
the vehicle.
3.
Install a new blade by reversing Steps
1
and
2.
6-42
.
=.
To Next Page
Loading...
Need help?
General
