Rotate the knob clockwise again to the master
lighting symbol to turn on all
the
lamps listed as
well as the headlamps.
Rotate the knob counterclockwise to the
OFF
symbol to
turn
off
your lamps.
Rotate the thumb wheel next to the knob up
to
adjust
instrument panel lights. Rotate the thumb wheel up to
the first notch
to
return
the
radio display and gearshift
indicator LED display to full intensity when the
headlamps or parking lamps are on.
To
turn on the dome
lamps (with the vehicle doors closed) rotate the thumb
wheel up to the second notch position.
You can switch your headlamps from high
to
low beam
by pulling on the turn signalhigh beam lever.
A
circuit breaker protects your headlamps. If you have
an electrical overload, your headlamps will flicker on
and
off.
Have your headlamp wiring checked right away
if this happens.
Headlamps-On Reminder
A
buzzer will sound when your headlamps are turned
on and your ignition
is
in
OFF,
LOCK or ACCESSORY.
If you need to use your headlamps when the ignition
switch is
in
OFF,
LOCK
or ACCESSORY, the buzzer
can be turned off
by
turning the thumb wheel next to the
parkingheadlamp switch all the way down.
Daytime Running Lamps
Daytime Running Lamps (DRL) can make it easier
for others to see the front of your vehicle during the
day. DRL can be helpful in many different driving
conditions, but they can be especially helpful
in
the
short periods after dawn and before sunset.
The DRL system will make your headlamps come on
at a reduced brightness when:
The ignition is on,
0
The headlamp switch is
off,
and
The parking brake is released.
2-36
To Next Page
Loading...
Need help?
General
