Center High-Mounted Stoplamp
(CHMSL)
The individual bulbs
in
the
CHMSL
are not replaceable.
See your dealer for assistance.
Roof Marker Lamps
1.
Remove the screws and lift off the lens.
2.
Pull the bulb straight out
of
the socket.
3.
Put a new bulb into the socket and push
it
in until it
4.
Replace the lens and tighten the screws.
is tight.
Rear Lamps
1.
Open the tailgate or rear doors.
2.
Remove the two black plastic plugs
in
the rear lamp
assembly access holes.
3.
Remove
the
two rear
lamp assembly screws
inside the fender and
pull out the lamp
assembly. You may want
to use a magnetic
screwdriver when
removing
the
screws.
6-41
To Next Page
Loading...
Need help?
General
