Infotainment System 71
Voice Pass-Thru
Voice pass‐thru allows access to the
voice recognition commands on the
cell phone. See your cell phone
manufacturer's user guide to see if
the cell phone supports this feature.
To access contacts stored in the
cell phone:
1. Press
b / g .
2. Say “Bluetooth.” The system
responds “Bluetooth ready,”
followed by a tone.
3. Say “Voice.” The system
responds “OK, accessing
<phone name>.”
The cell phone's normal prompt
messages will go through their
cycle according to the phone's
operating instructions.
Dual Tone Multi-Frequency
(DTMF) Tones
The Bluetooth system can send
numbers and numbers stored as
name tags during a call. Use this
feature when calling a menu-driven
phone system. Account numbers
can also be stored for use.
Sending a Number or Name Tag
During a Call
1. Press
b / g . The system
responds “Ready,” followed by
a tone.
2. Say “Dial.”
3. Say the number or name tag
to send.
Clearing the System
Unless information is deleted out
of the in‐vehicle Bluetooth system,
it will be retained indefinitely.
This includes all saved name tags
in the phone book and phone
pairing information. For information
on how to delete this information,
see the previous sections on
“Deleting a Paired Phone” and
“Storing and Deleting Phone
Numbers.”
To Next Page
Loading...
Need help?
General
