24
Chevrolet 2010 New Sail New Technical Training
- Learner's Manual
z Engine Coolant Temperature (ECT) Sensor
z Camshaft Position (CMP) Sensor
z Manifold Absolute Pressure (MAP) Sensor
2.5.2 ECM Output
z Idle Air Control (IAC) Motor
z Evaporative Emission (EVAP) Canister Purge Solenoid Valve Controlled by Control Modules
z Air Conditioning Relay
z Cooling Fan Relay
z Vehicle Speed Sensor (VSS) Output
z Malfunction Indicator Lamp (MIL) Control
2.5.3 EGR Valve
1. Position Sensor
2. Coil Assembly
3. Base
4. Pivot
5. Exhaust Entry
6. Armature
2.5.4 Programming and Setting of Engine Control Module
The following servicing programs need to be programmed or set to complete repair.
The replacement of the engine control module: if the engine control module (ECM) is replaced, then the
following programs must be executed: