14 MONITOR AFx™ v3.3 LCD Keypad User's Guide
500-9030v3.3
Alarm Monitoring Features
Depending on how the system is set up,
specific alarms may be indicated by any of the
following items:
•
An alarm message will appear on specific
keypad(s);
•
Keypad 'sonalerts' (beepers) may sound;
•
A local siren may be triggered;
•
An alarm message may be transmitted to a
central monitoring facility (and/or to a
management PC running the MONITOR AFx
Director software);
•
A programmable "output" may be triggered
(this can cause a horn to sound, or perform
any other type of automated 'switching'
function);
•
A numeric pager may be called to let the
wearer know that a specific type of alarm has
occurred.
These actions can be fully customized for each type
of event--for each arming level that the system can
be in at a given time (Off, Stay / Perimeter, or fully
ON).
Audible Keypad Tones
Visual indications (lights and LCD menu
prompts) are complemented by audible tones.
These are as follows:
When Arming and Disarming
_______ _______
Slow intermittent beep (approx. @ 1 second
intervals).
Entry and Exit Delay Tones (last 15
seconds)
__ __ __
Quick intermittent beep (approx. @ 1/2 second
intervals).
Error and Warning Tones
These tones are heard upon errors in keypad
entry, selection of wrong PIN numbers and to
indicate that there was an alarm (upon entry)
during the last armed period.
_ _ _ _ _
Very fast beep.
Trouble
This tone is heard when the system has a
problem (e.g. cut phone line) or the system
goes into alarm.
____________
Steady continuous tone.
Fire Alarm
__ __ _______ __ __
A repeating pattern with 0.5 seconds on, 0.5
seconds off. After 3 beeps (on), there is a 1.5
second delay, and then the cycle repeats.
Confirmation of PIN/ID & PIN Entry
Single short beep
Chime
When the chime feature is turned on and a
door is opened.
__ __
Three short low level beeps.
To Next Page
Loading...
Need help?
General
