xiv
Cisco 12000 Series Router SIP and SPA Hardware Installation Guide
Release 12.0(32)SY1, OL-8831-01, Rev. G6, July 19, 2007
Preface
Document Change History
12.0(32)S Release
12.0(32)S
January 20, 2006 Support for the following SPA interface processor (SIP) hardware
was introduced on the Cisco 12000 Series Routers:
• Cisco 12000 SIP-401
• Cisco 12000 SIP-501
• Cisco 12000 SIP-601
Provides descriptions and installation instructions for the following
SPAs installed in a SIP 401/501/601 on Cisco 12000 series routers:
• 1-Port 10-Gigabit Ethernet SPA
• 8-Port FastEthernet SPA
• 10-Port Gigabit Ethernet SPA
Support for the following hardware by the Cisco 12000 SIP-601
was introduced on the Cisco 12000 series router:
• 1-Port OC-192c/STM-64 POS/RPR SPA
• 1-Port OC-192c/STM-64 POS/RPR XFP SPA
Support for the following hardware by the Cisco 12000 SIP-501 and
Cisco 12000 SIP-601 was introduced on the Cisco 12000 series
router:
• 2-Port OC-48c/STM-16 POS SPA
12.0(32)SY Release
12.0(32)SY
June 26, 2006 Support for the following hardware by the Cisco 12000 SIP-401,
Cisco 12000 SIP-501 and Cisco 12000 SIP-601 was introduced on
the Cisco 12000 series router:
• 8-Port Fast Ethernet SPA (SPA-8X1FE-TX-V2)
• 1-Port 10-Gigabit Ethernet SPA (SPA-1X10GE-L-V2)
• 2-Port Gigabit Ethernet SPA (SPA-2X1GE-V2)
• 5-Port Gigabit Ethernet SPA (SPA-5x1GE-V2)
• 10-Port Gigabit Ethernet SPA (SPA-10X1GE-V2)
• 2-Port OC-3c/STM-1 and OC-12c/STM-4 POS SPA
• 4-Port OC-3c/STM-1 and OC-12c/STM-4 POS SPA
• 4-Port OC-3c/STM-1 POS SPA
• 8-Port OC-3c/STM-1 POS SPA
Support for the following hardware by the Cisco 12000 SIP-501 and
Cisco 12000 SIP-601 was introduced on the Cisco 12000 series
router:
• 8-port OC-12c/STM-4 POS SPA
12.0(32)SY1 Release
12.0(32)SY1
September 12, 2006 Support for the following hardware by the Cisco 12000 SIP-501 and
Cisco 12000 SIP-601 was introduced on the Cisco 12000 series
router:
• 1-Port OC-48c/STM-16 POS SPA
Table 1 Document Change History Table (continued)
Release No. Revision Date Change Summary