Cisco 12000 - Series Chassis Modular Expansion Base User Manual

1-8
Cisco 12000 Series Router SIP and SPA Hardware Installation Guide
Release 12.0(32)SY1, OL-8831-01, Rev. G6, July 19, 2007
Chapter 1 Overview: Cisco 12000 Series Router SPA Interface Processors
Cisco 12000 SIP-600 Overview
Cisco 12000 SIP-600 Overview
The following sections describe the Cisco 12000 SIP-600:
• Cisco 12000 SIP-600 Board Components, page 1-8
• Cisco 12000 SIP-600 LEDs, page 1-8
• Cisco 12000 SIP-600 Physical Specifications, page 1-9
• SPA Subslot Numbering on the Cisco 12000 SIP-600, page 1-9
• SPA Interface Addresses on the Cisco 12000 SIP-600, page 1-10
Cisco 12000 SIP-600 Board Components
The main Cisco 12000 SIP-600 board components are shown in Figure 1-5.
Figure 1-5 Cisco 12000 SIP-600 Board—Rear View
Cisco 12000 SIP-600 LEDs
The Cisco 12000 SIP-600 supports 2 single-width, double-height SPAs, 2 single-width, single-height
SPAs, or 1 dual-width, double-height SPA. The Cisco 12000 SIP-600 face plate has one Status LED.
Figure 1-6 shows the Cisco 12000 SIP-600 face plate with 2 single-width, single-height SPAs.
Figure 1-6 Cisco 12000 SIP-600 Face Plate
1 SPA enclosure 2 Backplane connector
122074
1
2
STAT US
1
0
12000-SIP-600
116871
3
1 2
3
4

Cisco 12000 - Series Chassis Modular Expansion Base Specifications

General

Brand	Cisco
Model	12000 - Series Chassis Modular Expansion Base
Category	Network Router
Language	English