Cisco 6800 Series Administration Guide

CFWD SyncDND SyncCFWD EnabledDND EnabledFeature Key Sync
Yes (SIP)Yes (SIP)NoNoYes
Yes (SIP)Yes (SIP)YesNoYes
Yes (SIP)Yes (SIP)NoNoYes
Yes (HTTP)Yes (HTTP)YesYesNo
Yes (HTTP)NoYesNoNo
NoYes (HTTP)NoYesNo
NoNoNoNoNo
If a line key is configured with FKS or XSI synchronization and is also enabled with DND or call forwarding,
the respective DND icon or the call forwarding icon is displayed next to the line key label. If the line
key has a missed call, a voice message, or an urgent voicemail alert, the DND icon or the call forwarding icon
is also displayed with the alert notification.
Related Topics
Enable Feature Key Sync, on page 193
Enable Call Forwarding Status Sync via XSI Service, on page 194
Enable DND Status Sync via XSI Service, on page 194
Enable Feature Key Sync
When you enable the Feature Key Synchronization (FKS), the settings of call forwarding and do not disturb
(DND) on the server are synchronized to the phone. The changes in DND and call forwarding settings made
on the phone will also be synchronized to the server.
Before you begin
Access the phone administration web page. See Access the Phone Web Page, on page 92.
Procedure
Step 1 Select Voice > Ext [n] (where [n] is the extension number).
Step 2 In the Call Feature Settings section, set the Feature Key Sync field to Yes.
Step 3 Click Submit All Changes.
Related Topics
DND and Call Forwarding Status Sync, on page 192
Enable Call Forwarding Status Sync via XSI Service, on page 194
Enable DND Status Sync via XSI Service, on page 194
Cisco IP Phone 6800 Series Multiplatform Phones Administration Guide
193
Phone Administration
Enable Feature Key Sync

Cisco 6800 Series Specifications

General

Brand	Cisco
Model	6800 Series
Category	IP Phone
Language	English