Cisco 6800 Series Administration Guide

Configure the SIP Timer Values
Before you begin
Access the phone administration web page. See Access the Phone Web Page, on page 92.
Procedure
Step 1 Select Voice > SIP.
Step 2 In the SIP Timer Values section, set the SIP timer values in seconds as described in SIP Timer Values (sec),
on page 234.
Step 3 Click Submit All Changes.
Configure the Response Status Code Handling
Before you begin
Access the phone administration web page. See Access the Phone Web Page, on page 92.
Procedure
Step 1 Select Voice > SIP.
Step 2 In the Response Status Code Handling section, set the values as specified:
• Try Backup RSC—SIP response code that retries a backup server for the current request. Defaults to
blank. For example, you can enter numeric values 500 or a combination of numeric values plus wild
cards if multiple values are possible. For the latter, you can use 5?? to represent all SIP Response messages
within the 500 range. If you want to use multiple ranges, you can add a comma "," to delimit values of
5?? and 6??.
• Retry Reg RSC—SIP response code that the phone retries registration after failing during the last
registration. Defaults to blank. For example, you can enter numeric values 500 or a combination of
numeric values plus wild cards if multiple values are possible. For the latter, you can use 5?? to represent
all SIP Response messages within the 500 range. If you want to use multiple ranges, you can add a comma
"," to delimit values of 5?? and 6??.
Step 3 Click Submit All Changes.
Configure the RTP Parameters
Before you begin
Access the phone administration web page. See Access the Phone Web Page, on page 92.
Cisco IP Phone 6800 Series Multiplatform Phones Administration Guide
69
Phone Installation
Configure the SIP Timer Values

Cisco 6800 Series Specifications

General

Brand	Cisco
Model	6800 Series
Category	IP Phone
Language	English