Cisco 7906 User Manual

Basic Call Handling
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified CallManager 5.01 (SCCP and SIP) 23
Starting or Joining a Meet-Me Conference Call
Meet-Me conferencing allows you to start or join a conference by dialing the conference number.
If you want to... Then...
Start a Meet-Me conference 1. Obtain a Meet-Me phone number from your system administrator.
2. Distribute the number to participants.
3. When you are ready to start the meeting, go off-hook to invoke a
dial tone, then press MeetMe.
4. Dial the Meet-Me conference number.
Participants can now join the conference by dialing in.
Note
Participants hear a busy tone if they call the conference before the
initiator has joined. In this case, participants must call back.
Participate in a Meet-Me
conference
Dial the Meet-Me conference number (provided by the conference
initiator).
Note
You will hear a busy tone if you call the conference before the
initiator has joined. In this case, try your call again.
End a Meet-Me conference All participants must hang up.
The conference does not automatically end when the conference
initiator disconnects.

Cisco 7906 Specifications

General

Brand	Cisco
Model	7906
Category	IP Phone
Language	English