Cisco Unified IP Phone 7906G and 7911G for Cisco Unified CallManager 5.1 (SCCP and SIP) 1
Getting Started
Using this Guide
This guide provides you with an overview of the features available on your phone. You can read it
completely for a solid understanding of your phone’s capabilities, or refer to the table below for
pointers to commonly-used sections.
If you want to... Then...
Explore your phone on your own Press and choose Help.
Review safety information See Safety and Performance Information, page 2.
Connect your phone See Connecting Your Phone, page 5.
Use your phone after it is installed Start with An Overview of Your Phone, page 9.
Learn about the phone buttons See Understanding Buttons and Hardware, page 9.
Make calls See Placing a Call—Basic Options, page 13.
Put calls on hold See Using Hold and Resume, page 16.
Transfer calls See Transferring Calls, page 17.
Make conference calls See Making Conference Calls, page 20.
Set up speed dialing See Speed Dialing, page 24.
Share a phone number See Using a Shared Line, page 26
Use the speaker on the phone See Using a Handset, Headset, and Speaker, page 32.
Change the ring volume or tone See Using Phone Settings, page 35.
View your missed calls See Using Call Logs and Directories, page 37.
Listen to your voice messages See Accessing Voice Messages, page 44.
See softkey and icon definitions Refer to the Quick Reference Card in the front of this guide.
To Next Page
Loading...
Need help?
General
