Cisco 7912 - TEKELEC User Manual

In This Manual
Cisco 7912 Telephone User Guide Your Cisco Telephone 3
620-05600350
Moving Your Telephone
Before moving your telephone, you should check with your system administrator to
make sure that there is power for the telephone at the new location. You need a
power adapter for your phone at the new location as well.
To move your phone, follow these steps:
1. Unplug the telephone from the LAN connection jack and the power adapter
from the wall.
2. Take the telephone to the new location.
3. Plug the telephone into the LAN connection jack and the power adapter into
a wall outlet.
4. Watch to ensure that the phone registers and boots up properly. If it does not,
contact your system administrator.
Dial pad Works exactly like the dial pad on a
traditional telephone.
Volume button Increases or decreases volume for the
handset. Also controls the ringer volume (if
on-hook).
Handset with indicator
light
Functions like a traditional handset. The
light strip at the top of the handset can be
configured to indicate incoming calls and
new voice messages.
Features Descriptions

Cisco 7912 - TEKELEC Specifications

General

Brand	Cisco
Model	7912 - TEKELEC
Category	IP Phone
Language	English