Hold-on Queuing
34 System Telephone Features Cisco 7912 Telephone User Guide
620-05600350
Hold-on Queuing
This feature allows you to wait for a busy outgoing line to become available.
When you try to make an external call and all outgoing lines are unavailable, you
will hear a recorded announcement.
• Hold for a line to become available.
• When a line becomes available, the system automatically dials the
external number for you.
Hunt Groups
The Hunt Group feature allows the system to distribute calls made to a specific
"pilot" number or to any member of a defined group based on the specified hunting
order. If you have a phone with a display, you will see either the caller ID for the call
or the hunt group name, depending on how your hunt group is configured.
Your system administrator or manager should tell you if you are a member of a hunt
group, who the other members are, and what should appear on your phone’s
display, if you have a display.
Intercom Calls (Receive Only)
Incoming Intercom calls are announced by a brief dial-tone followed by the
intercom tones. A tone is played every 60 seconds during active intercom calls.
Meet-Me Conference
If supported by your system, Meet-Me Conferencing provides the ability to
schedule conference calls where the moderator (who has control of the
conference) and other members (internal or external) call into the conference and
are connected at the appropriate time to carry on the conference call.
Moderators can do any of the following:
• Schedule a conference
• Cancel a conference
• Modify a conference
• List all conferences
Check with your system administrator to find out if you are authorized to schedule
Meet-Me Conferences. The default internal access number is 523, but check with
your system administrator if the default does not work for your system. If a DID
To Next Page
Loading...
Need help?
General
