Cisco 7921G User Manual

Using a Handset, Headset, and Speakerphone
Cisco Unified Wireless IP Phone 7921G for Cisco Unified Communications Manager 4.3, 5.1, 6.0 and Later 61
Using AutoAnswer
You might use AutoAnswer if you receive a high volume of incoming calls or handle calls on behalf of
others. Your system administrator configures AutoAnswer to work with either your speaker mode or
headset.
Tip
AutoAnswer is disabled when the Do Not Disturb feature is active.
If you... Then...
Use AutoAnswer with a
headset
Keep headset mode active by ensuring the headset is plugged into the
phone, even when not on a call.
If your phone is set up to use AutoAnswer in headset mode, calls are
answered automatically only if the icon is in the phone status line.
Otherwise, calls ring normally and you must manually answer them.
Use AutoAnswer with the
desktop charger speaker
Keep the handset in the desktop charger cradle, so the speaker is active.
If your phone is set up to use AutoAnswer in speaker mode, calls are
answered automatically using the desktop charger speaker.
Note You cannot turn off the desktop charger speaker. You must remove
the phone from the cradle to disable the desktop charger speaker.

Cisco 7921G Specifications

General

Brand	Cisco
Model	7921G
Category	IP Phone
Language	English