A-9
Cisco Integrated Services Router Hardware Installation Guide
Appendix A Technical Specifications
Cisco 810 Series
Supported Power Adapters
Table A-5 and Table A-6 list the supported power adapters for Cisco 819 ISRs. The PWR1 AC and DC
adapters uses molex connector while PWR2 uses barrel-type connector.
C819HGW-S-A-K9
C819HGW-V-A-K9
220,000
C819HGW+7-E-K9
C819HGW+7-N-K9
C819HGW+7-A-A-K9
293,000
C819HWD-E-K9
C819HWD-A-K9
630,000
C819H-K9 1,000,000
Cisco 819HG-4G and Cisco 819G-4G ISRs
C819HG-4G-V-K9
C819G-4G-V-K9
214,000
C819HG-4G-A-K9
C819G-4G-A-K9
226,000
C819HG-4G-G-K9
C819G-4G-G-K9
293,000
Table A-4 MTBF Values (continued)
SKUs MTBF (hours)
Table A-5 Cisco 819G ISR Power Adapters
Power Adapter
Nominal Input
Range
C819G-4G-A-K9
C819G-4G-V-K9
C819G-4G-G-K9
(4G LTE SKUs)
C819G+7-K9
C819G-B-K9
C819G-S-K9
C819G-U-K9
C819G-V-K9
(3GSKUs)
PWR1-20W-AC 100–240 VAC — Yes
PWR2-20W-AC 100–240 VAC Yes —
PWR1-20W-12VDC 12 VDC — Yes
PWR2-20W-12VDC 12 VDC Yes —
PWR1-20W-24VDC 24 VDC — Yes
PWR2-20W-24VDC 24 VDC Yes —
Martek MBRH 0500-B/Q21 24 VDC — Yes
Martek MBRH 0500-C/Q21 52 VDC — Yes
Martek MBRH 0500-D/Q21 72 VDC — Yes
To Next Page
Loading...
Need help?
General
