Cisco APIC L3 User Manual

Table 11: 770 W AC Specifications
SpecificationDescription
Nominal range: 100–120 VAC, 200–240 VAC
(Range: 90–132 VAC, 180–264 VAC)
AC Input Voltage
Nominal range: 50 to 60Hz
(Range: 47–63 Hz)
AC Input Frequency
9.5 A at 100 VAC
4.5 A at 208 VAC
Maximum AC Input current
950 VA at 100 VACMaximum input volt-amperes
15 A (sub-cycle duration)Maximum inrush current
12 ms at 770 WMaximum hold-up time
770 WMaximum output power per PSU
12 VDCPower supply output voltage
12 VDCPower supply standby voltage
Climate Savers Platinum Efficiency (80Plus Platinum certified)Efficiency rating
RSP2Form factor
IEC320 C14Input connector
1050 W DC Power Supply
This section lists the specifications for each 1050 W DC power supply (Cisco part number
UCSC-PSUV2-1050DC).
Table 12: 1050 W DC Specifications
SpecificationDescription
Nominal range: -48 to -60 VDC
(Range: -40 to -72 VDC)
DC Input Voltage
32 A at -40 VDCMaximum DC input current
1234 WMaximum input wattage
35 A (sub-cycle duration)Maximum inrush current
5 ms at 100% load (1050 W main and 36 W standby)Maximum hold-up time
Cisco APIC M3/L3 Server Installation and Service Guide
95
Server Specifications
1050 W DC Power Supply

Cisco APIC L3 Specifications

General

Brand	Cisco
Model	APIC L3
Category	Server
Language	English