Cisco ASR 907 User Manual

Figure 48: Fan Tray Removal
When removing the fan tray, keep your hands and fingers away from the spinning fan blades. Let
the fan blades completely stop before you remove the fan tray. Statement 258
Warning
Step 4 Wait at least 5 seconds to allow the fans to stop spinning. Then, pull the fan tray backward toward you and
out of the chassis.
As the fan tray slides out of the chassis, support the bottom of the fan tray with one hand and keep
your other hand on the fan tray handle.
Note
This completes the steps for removing the fan tray from the chassis.
The chassis must not be allowed to operate without functioning fans for more than 60 seconds.
Note
To install the new fan tray, follow the steps in Installing the Fan Tray .
RSP Installation
Follow these steps on handling an RSP module in the Cisco ASR 907 Router:
Installing an RSP Module
To install an RSP module in the router chassis, perform the following steps:
Cisco ASR 907 Router Hardware Installation Guide
74
Installing the Cisco ASR 907 Router
RSP Installation

Cisco ASR 907 Specifications

General

Brand	Cisco
Model	ASR 907
Category	Network Router
Language	English