Cisco Catalyst 2960-X Series User Manual

Step 5
(Optional) Use the small sleeve for thin power cords. Use the small sleeve to provide greater stability for thin
cords. Detach the sleeve, and slide it over the power cord.
Figure 25: Sleeve Around the Power Cord
AC power cord2Sleeve for thin power cords1
Step 6
Secure the AC power cord by pressing on the retainer.
Figure 26: Securing the Power Cord in the Retainer
Installing SFP and SFP+ Modules
Some switch models support SFP modules, SFP+ modules, or both. The SFP slots support only the SFP
modules. The SFP+ slots support both SFP and SFP+ modules.
See the switch release notes on Cisco.com for the list of supported SFP modules. Use only Cisco SFP modules
on the switch. Each Cisco module has an internal serial EEPROM that is encoded with security information.
This encoding provides a way for Cisco to identify and validate that the module meets the requirements for
the switch.
Catalyst 2960-X and 2960-XR Switch Hardware Installation Guide
OL-28309-02 45
Switch Installation
Installing SFP and SFP+ Modules

Cisco Catalyst 2960-X Series Specifications

General

Brand	Cisco
Model	Catalyst 2960-X Series
Category	Switch
Language	English